Brake Fluid
Heavy duty brake and clutch fluid with a minimum boiling point of 238°C (460°F). The brake fluid forms an essential component in the braking system of car.
Automatic Transmission Fluid
High quality performance automatic transmission fluid which possessed oxidation resistance, low temperature fluidity, appropriate friction performance, and high shear stability.
Transmission Gear Oil
Heavy duty automotive gear oils, formulated from high quality base oil and strong extreme pressure additive of sulphur and phosphorus type.
Diesel Engine Oil
Diesel engine oil with High Performance level and is formulated to give better engine protection and longer drain intervals.
Radiator Coolant
An engine coolant based on ethylene glycol. It contains a corrosion inhibitor package, which does not contain nitrites, amines, and phosphates. This product was developed to protect car, bus, and truck engine both ferrous and aluminium construction against corrosion and frost damage. It contains a blend of inhibitors designed to give a high degree of corrosion protection to engine component such as radiators, cylinder blocks / heads and water pumps.
Mineral Hydraulic Oil
Fully formulated zinc-based hydraulic lubricant with has been developed specifically to deliver high-performance lubrication in industrial power transmission systems. Protection against wears, multi-metal corrosion, and oxidation while operating under the conditions of high severity.
Fire Resistant Hydraulic Fluid
Water glycol fire resistant hydraulic fluid, which formulated with a high quality polyalkylene glycol thickener, diethylene glycol and selected additives.
HFDU
A high flash point, bio-degradable hydraulic fluid which is based on synthetic polyol ester, antioxidants, anti-wear and anti corrosion additives. Due to the nature of the ester, this product has extremely good viscosity/temperature properties and has relationship with high viscosity index, high thermal stability and excellent lubricity.
Industrial Gear Oil
Formulated sulphur-phosphorous based industrial gear lubricant which has been developed specifically to deliver high-performance lubrication in enclosed gear sets operating under heavy or shock loads. It is blended from selective base oil and a comprehensive additive package to provide the necessary levels of protection against wears, multi-metal corrosion, foaming and oxidation while operating under the conditions of high severity.
Compressor Oil
Tornado M Series is an ash free compressor lubricant, which provides the necessary levels of protection against wear, multi-metal corrosion, and excellent oxidation stability for lubricants operating under conditions of high severity. Tornado X Series is our top tier synthetic compressor lubricant to provide long oil life and effective lubrication under prolonged high temperature and heavy load condition.
Circulating, Bearing, Spindle Oil
Ash free circulation and bearing lubricants, which formulated from highly refined base stocks and an additive system, which provide oxidation stability, excellent protection against rust and corrosion, and good anti-wear properties for lubricants operating under conditions of high severity. LIQTRO CIRCULATING is also recommended for continuous service in the lubrication of plain and rolling bearings and parallel shaft gearing. They have also been used successfully in turbine and rotary air compressor applications, as well as vacuum pumps.
Heat Transfer Oil
High quality heat transfer oil with high viscosity index and high oxidation stability. These lubricating oil provides superior performance for non pressurized, closed fluid heat transfer system operating at bulk temperature up to 320°C.
Slideway
Designed to prevent the “stick-slip”. Uses EP additives that form a hard boundary layer of protection and tackiness additive that improve the adhesion properties of the oil, even under the most difficult working condition.
Neat Cutting Oil
Mineral neat cutting oil, which formulated using sulphured extreme pressure additive and fatty ester additive. In application, will not mets, provides a lubricating film of high sear strength. Can be used in much range application, sawing, turning, milling, drilling, tapping, etc, for ferrous and non-ferrous metal, primarily to provide cooling and lubrication which lead to good tool life and appropriate surface finish of the components being machined.
Stamping, Forging & Forming Oil
Metal forming lubricants, which formulated with EP additive, lubricity improver additive, and anti-wear additive. The lubricant provides tools and mould protection from micro-weld result in longer life and guarantee work-piece smooth surface finish.
EDM Oil
High performance lubricant, highly refined mineral oil, specially develop for Electrical Discharge Machine (EDM). It’s low viscosity, low volatility, and high oxidation resistant.
Soluble Oil Coolant
Water - miscible metal working fluid, which produces a superior quality milky, opaque, emulsion when mixed with water. The products don’t contain nitrite and phenol which ensure safe working environment. The boundary properties afforded by high oil content provides good machining performance and high degree of residual corrosion protection. This product contains biocide package used to prolongs service life.
Semi Synthetic Coolant
Semi synthetic water - mix metal working, correct choice for cutting oil fluid, allows longer service life, excellent heat transfer, and provides excellent hydrodynamic lubricity characteristics, leading to reductions in tool wear. Formulated from high quality emulsifier, corrosion inhibitor, lubricity improver, which have the capability in providing good machining performance a high degree of residual corrosion protection, and protects against bacterial degradation and emulsion breakdown.
Whizol Emulcut SS 62 J
Semi-synthetic coolant providing a balance of lubrication and cooling with good stability and performance.
Request Consultation
Whizol Emulcut SS 32 J
Cost-effective coolant designed for consistent machining results and reliable protection against wear and corrosion.
Request Consultation
Full Synthetic Coolant
A new long life coolant, multi purpose and correct choice for cutting and grinding fluid. It provides excellent cooling and lubricity for light-duty cutting and grinding of ferrous metals, resulting in extended tool life and good surface finishes on the machine parts.
Rust Preventive
Excellent rust and corrosion protection lubricant, protect metals and machine parts during and after treatment as well as during in and outdoor storage until they further treated or assembled.
Whizol Stop Rust LX 10
Advanced anti-rust solution offering long-lasting protection in demanding conditions.
Request Consultation
Quenching Oil
Poly alkylene glycol based polymer quenchant designed for use in induction hardening applications to minimize residual sticky deposits on equipment and quenched parts, and extend system life.
Plunger Oil
Lubricant for plunger process related to steel or aluminium part printing which is specially designed with mineral base oil composition, quality additives and contains Extreme Pressure (EP) Additive. Lubrication ability can work well to protect tip and sleeve and compete with conventional graphite lubricants.
Cleaner and Washing Fluid
Washing fluid, formulation is especially suitable for cleaning and removing oils, fats and greases.
